BAS EN ISO 10360-10:2017 
Naslov
Geometrijske specifikacije proizvoda (GPS) -Prihvatljivost i verifikacioni testovi za koordinatne mjerne mašine (CMS) - Dio 10: Laserski sistemi za mjerenje udaljenosti od tačke do tačke
Naslov na engleskom jeziku
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances
Područje primjene
Nema informacija.
Područje primjene na engleskom jeziku
ISO 10360-10:2016 specifies the acceptance tests for verifying the performance of a laser tracker by measuring calibrated test lengths, test spheres and flats according to the specifications of the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the laser tracker. The acceptance and reverification tests given in this part of ISO 10360 are applicable only to laser trackers utilizing a retro-reflector as a probing system. Laser trackers that use interferometry (IFM), absolute distance meter (ADM) measurement, or both can be verified using this part of ISO 10360. This part of ISO 10360 can also be used to specify and verify the relevant performance tests of other spherical coordinate measurement systems that use cooperative targets, such as "laser radar" systems.
NOTE Systems, such as laser radar systems, which do not track the target, will not be tested for probing performance.
ISO 10360-10:2016 does not explicitly apply to measuring systems that do not use a spherical coordinate system (i.e. two orthogonal rotary axes having a common intersection point with a third linear axis in the radial direction). However, the parties can apply this part of ISO 10360 to such systems by mutual agreement.
ISO 10360-10:2016 specifies
- performance requirements that can be assigned by the manufacturer or the user of the laser tracker,
- the manner of execution of the acceptance and reverification tests to demonstrate the stated requirements,
- rules for proving conformance, and
- applications for which the acceptance and reverification tests can be used.
Tehnički komitet
ICS
Direktiva/Uredba
Nema informacija.Nacionalne aktivnosti
Nema informacija.Faza izrade standarda
60.60 - BAS standard dostupan javnosti (BAS) - Datum realizacije: 2017-06-14
Oznaka standarda
Status
Jezik
Objavljen
Br. str.
Cijena
Kupi
Važeći

2008-09-12
5
30 KM
Geometrijske specifikacije proizvoda (GPS) - Prihvatljivost i reverifikacioni testovi za trokoordinatne mjerne mašine (CMM)- Dio 1. Rječnik; Amandman AC
Važeći

2008-09-12
30
68 KM
Geometrijske specifikacije proizvoda (GPS) -Prihvatljivost i reverifikacioni testovi za trokoordinatne mjerne mašine (CMM) - Dio 1. Rječnik
Povučen

2008-09-12
14
46 KM
Geometrijske specifikacije proizvoda (GPS) - Prihvatljivost i reverifikacioni testovi za trokoordinatne mjerne mašine (CMM)- Dio 2: Upotreba koordinantnih mjernih mašina (CMMs) ili mjerenje veličine (ISO 10360-2:2001)/Napomena: Zamjenjen sa EN ISO 10360-2 (2005-12)
Važeći

2011-05-23
31
68 KM
Geometrijske specifikacije proizvoda (GPS) – Prihvatljivost i testovi reverifikacije za koordinantne mjerne mašine (CMM) – Dio 2: Koordinantne mjerne mašine (CMMs) koje se koriste za linearna mjerenja
Važeći

2008-09-12
15
46 KM
Geometrijske specifikacije proizvoda (GPS) - Prihvatljivost i reverifikacioni testovi za trokoordinatne mjerne mašine (CMM)- Dio 3: Koordinantne mjerne mašine sa osom obrtnog stola kao četvrtom osom
Važeći

2008-09-12
4
23 KM
Geometrijske specifikacije proizvoda (GPS) - Prihvatljivost i reverifikacioni testovi za trokoordinatne mjerne mašine (CMM)- Dio 4: Koordinantne mjerne mašine koje se koriste u mjernom modu skeniranja; Amandman AC
Važeći

2008-09-12
15
46 KM
Geometrijske specifikacije proizvoda (GPS) - Prihvatljivost i reverifikacioni testovi za trokoordinatne mjerne mašine (CMM)- Dio 4: Koordinantne mjerne mašine koje se koriste u mjernom modu skeniranja
Povučen

2008-09-12
13
46 KM
Geometrijske specifikacije proizvoda (GPS) - Prihvatljivost i reverifikacioni testovi za trokoordinatne mjerne mašine (CMM)- Dio 5: Koordinantne mjerne mašine koje koriste sisteme sa višestrukim mjernim sondama
Važeći

2012-05-31
33
76 KM
Geometrijske specifikacije proizvoda (GPS) - Prihvatljivost i reverifikacioni testovi za koordinatne mjerne mašine (CMM) - Dio 5: Koordinantne mjerne mašine koje koriste kontaktne sisteme sa prostim i višestrukim kontaktnim sondama
Važeći

2010-08-09
3
23 KM
Geometrijske specifikacije proizvoda (GPS) – Odobravanje i reverifikacije koordinantnih mjernih mašina (CMM) – Dio 6: Procjena grešaka pri proračunavanju pridruženih Gausovih karakteristika
Važeći

2008-09-12
15
46 KM
Geometrijske specifikacije proizvoda (GPS) - Prihvatljivost i reverifikacioni testovi za trokoordinatne mjerne mašine (CMM)- Dio 6: Procjena grešaka pri proračunavanju pridruženih Gausovih karakteristika
Važeći

2012-05-31
42
85 KM
Geometrijske specifikacije proizvoda (GPS) - Prihvatljivost i reverifikacioni testovi za koordinatne mjerne mašine (CMM) - Dio 7: Koordinate mjerne mašine (CMM) u sistemima za mjerenje i snimanje
Važeći

2015-06-29
54
92 KM
Geometrijske specifikacije proizvoda (GPS) - Prihvatljivost i reverifikacioni testovi za koordinatne mjerne mašine (CMM) - Dio 8: Koordinatne mjerne mašine (CMM) sa optičkim senzorima za rastojanje
Važeći

2015-06-29
21
61 KM
Geometrijske specifikacije proizvoda (GPS) - Prihvatljivost i reverifikacioni testovi za koordinatne mjerne mašine (CMM) - Dio 9: CMM sistemi sa više sondi
Projekt

44
85 KM
Geometrijske specifikacije proizvoda (GPS) – Ispitivanja prihvatljivosti i ponovne verifikacije za koordinatne mjerne sisteme (CMS) – Deo 12: Mašine za mjerenje koordinata sa zglobnom polugom (iss)