BAS CEN/TR 1295-4:2018

BAS CEN/TR 1295-4:2018

Početna » Standardizacija » BAS CEN/TR 1295-4:2018
BAS CEN/TR 1295-4:2018 Print
Status: Važeći
Jezik: engleski
Broj stranica: 23
Objavljen: 2018-06-13
Glasnik: 2018/2
Izdanje:
Referentni broj izvornog dokumenta i stepen usklađenosti:
CEN/TR 1295-4:2015, identičan

Cijena: 61 KM

Add to cart

Naslov

Statički proračun podzemnih cjevovoda pod različitim uvjetima opterećenja - Dio 4: Parametri za pouzdanost proračuna

Naslov na engleskom jeziku

Structural design of buried pipelines under various conditions of loading - Part 4: Parameters for reliability of the design

Područje primjene

Nema informacija.

Područje primjene na engleskom jeziku

This Technical Report lists the parameters for the reliability of the structural design of buried water and wastewater pressure pipelines, drains and sewers. The reliability of the design of buried pipelines is based on the selection of appropriate design parameters for a chosen design method. This document identifies the parameters appropriate to the chosen design method, which should all be clearly stated. This Technical Report does not aim to specify the requirements for the structural design of water and wastewater pressure pipelines, drains and sewers. EN 1295 1 “Structural design of buried pipelines under various conditions of loading — Part 1: General requirements” defines these requirements. This Technical Report does not apply for offshore laying, pipes supported on piles, no dig pipelines, or laid above ground. Supplementary considerations need to be taken into account for these specific installations. Special situations (e.g. landslide, earthquake, fire) are outside the scope of this document. Design parameters for calculation of longitudinal effects (including bending moments, shear forces and tensile forces resulting for example from non uniform bedding and thermal movements and, in the case of pressure pipelines, from Poisson's contraction and thrust at change of direction or cross-section) are not covered in this document.

Tehnički komitet

ICS

Direktiva/Uredba

Nema informacija.

Nacionalne aktivnosti

Nema informacija.

Faza izrade standarda

60.60 - BAS standard dostupan javnosti (BAS) - Datum realizacije: 2018-06-13

Oznaka standarda
Status
Jezik
Objavljen
Br. str.
Cijena
Kupi
Važeći
2008-12-29
112
120 KM 
Kupi
Statički proračun podzemnih cjevovoda pod različitim uslovima opterećenja - Dio 2: Pregled nacionalno utvrđenih metoda proračuna
Važeći
2012-04-23
206
144 KM 
Kupi
Statički proračun podzemnih cjevovoda pod različitim uslovima opterećenja - Dio 3: Uobičajena metoda